High port to low port swap, wiring harness?

[Martin]

You'll need to use your HP distributor set up.  If you can swap a LP VE in a B13, this should definitely be doable.





>________________________________
> From: Grover Pickering <groverpickering at gmail.com>
>To: Jim Wright <wrightj at apple.com> 
>Cc: se-r list <se-r at se-r-list.org> 
>Sent: Tuesday, January 10, 2012 6:56 AM
>Subject: Re: High port to low port swap, wiring harness?
> 
>
>Based on what I read - and my extremely limited technical knowledge - this is what the answer seems to be....
>
>Swap should work
>Some sensors may need to be swapped over if the sensor connectors don't match (i.e. water temp)
>Throttle cable may need some work/"engineering"
>Looks like swapping HP cams into LP engine is a good thing.
>May have some extra wire on a couple of sensors
>
>Anyone of you smart folks have anything to add?
>
>Grover
>
>
>
>On Mon, Jan 9, 2012 at 12:46 PM, Jim Wright <wrightj at apple.com> wrote:
>
>Hey, throwing this back to the list again, has anyone done a swap this direction?  Any gotchas to worry about?
>>
>>Jim
>>
>>
>>On Oct 19, 2011, at 3:44 PM, Jim Wright wrote:
>>
>>> Can anyone definitively answer if a high port wiring harness will work with a low port SR20DE swap?  I've got a '91 B13 with a blown engine, high port, and have a low port replacement.  Other than moving sensors and such over, and maybe undoing a few zip ties to free up cable slack, should this work?
>>>
>>> Most of the swaps I've come across in my reading have gone from low to high.
>>
>>
>>
>>+----------------------------------------------------------------------+
>>The mailing list home page is http://www.se-r-list.org/
>>To modify your subscription, go to http://www.se-r-list.org/mailman/listinfo/se-r
>>
>
>+----------------------------------------------------------------------+
>The mailing list home page is http://www.se-r-list.org/
>To modify your subscription, go to http://www.se-r-list.org/mailman/listinfo/se-r
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.se-r-list.org/pipermail/se-r/attachments/20120111/bcd7d985/attachment.html