JWT PP Install

Aaron K se-r@limitedslip.net
Wed, 20 Aug 2003 20:17:42 -0500


Yep, I had this same problem just a week or two ago, and it was discussed here
at some length.  I too had already modified the bracket (welding a spacer on
rather than redrilling holes).

I moved my clutch pedal up 1/4" of an inch (or less) and readjusted the clutch
cable, and it fixed the problem (thanks Raymond).

Aaron

> I have a quite new B13 clutch cable and have moved my clutch cable bracket
> back by drilling new holes, basically for more adjustment.  The throwout
> bearing I used was Nissan part number: 30502-53J05