3M window weld and Cure Time

Ben Davis bendavis@sr20deforum.com
Fri, 14 Jun 2002 08:41:11 -0500


> My only problem is this is my daily driver AND my only
> car. I do not want to be without it for too long.

Use 94 shore urethane from McMaster-Carr instead. It sets MUCH faster than
3M window weld, and, from my experience, works better than the 3M weld. Just
go to www.mcmaster.com , type in part number 8644K18, and order it. You will
need to use duct tape or plastc wrap on one side of your mounts because this
stuff pours. Just mix up the two ingredients and pour. They will be ready to
install the next morning. The 3M stuff (with no ovening) takes many days to
full harden.

Ben Davis
92 Sentra SE-R